Veilige betaling
Via iDeal, bankoverschrijving
of pinnen/contant bij ophalen
Grote voorraad
Ook apparatuur uit
het hoge segment
100% verzekerd
Dubbel verpakt en
verzekerd per PostNL
Icom IC-M506 EURO+

The IC-M506 is packed full of features including integrated AIS receiver, NMEA2000 connectivity, ‘Last Call’ voice recording function, ‘Active Noise Cancelling’ technology plus Icom’s new intuitive menu-driven user interface and large dot matrix display making it really easy to use.

Lees meer..

Beschikbaarheid: Niet op voorraad. Backorder mogelijk.

Normale prijs: € 639,00


Special Price € 529,00

The IC-M506 is the first Icom VHF model to have an integrated AIS receiver, allowing you to bring up vessel traffic information on the display. The AIS target call function allows you to easily set up an individual DSC call.....a very important feature in an emergency. Functions like Plotter, Target list and Danger list can easily be toggled on the display.

Another first for Icom, the IC-M506 features the plug-and-play functionality of NMEA 2000 as well the ability to switch also NMEA 0183 for current equipment.

A ‘last call’ voice recording function which automatically saves the last two minutes of incoming calls mean you can replay the received calls which is very important in clarifying important transmissions that may have been missed.

The IC-M506 also features Icom’s superb ‘Active Noise Cancelling’ technology. Using the digital signal processing (DSP), the built-in bidirectional active noise cancelling improves audio quality both ways, making sure you are heard and you can hear when you really need to, such as when weather conditions are poor or if engines are running.

The new intuitive Icom common user interface, featured on all new Icom marine radios provides easy and fast operation to control the multiple functions. A high definition dot matrix display allows all information such as GPS, AIS, DSC and radio menus to be clearly viewed. The IC-M506EURO also features the most Advanced Waterproofing for a VHF in the market; IPX8. Designed and tested to survive after being submersed in 1m of water for 60 minutes.

As with other Icom fixed units, there is the option of a 2nd station Commandmic. Most functions including DSC and AIS functions can be controlled from the COMMANDMIC. It can also be used as an intercom between the IC-M506 and the COMMANDMIC. The radio also provides 25W Two-Way Hailer capability. When connected to an external hailer horn, you can talk to people on the deck or shore from the radio’s microphone and can hear people’s reply via the hailer speaker. Horn and RX hailer functions are also available.


Frequency range
Tx: 156.025–157.425MHz
Rx: 156.050–163.275MHz
CH70: 156.525MHz
AIS1, 2: 161.975MHz, 162.025MHz

Type of emission
16K0G3E (FM), 16K0G2B (DSC)

Usable channels
USA, INT, CAN, WX channels

Power supply requirement
13.8V DC ±15%

Current drain (at 13.8V DC)
Transmit: 5.5A (25W output)
Receive: 1.5A

Operating temperature range
–20°C to +60°C;
–4°F to +140°F

Antenna impedance
50Ω (SO-239) 

Dimensions (W×H×D) (projections not included)
175×110×TBA mm;
6.66×3.14×TBA in.

Weight (approx.)

NMEA formats
Output: DSC, DSE 


Output power
25W or 1W (at 13.8V DC)

Max. freq. deviation
± 5.0 kHz

Frequency stability
± 10.0ppm (–20°C to +60°C)

Spurious emissions
Less than -70dBc

Residual modulation
More than 40dB

Adjacent channel power
More than 70dB


Intermediate frequency
1st 21.7MHz, 2nd 450kHz

Sensitivity (at 12dB SINAD)
0.22µV typical

Squelch sensitivity
Less than 0.32µV

Adjacent Ch. selectivity
80dB typical

Spurious response
80dB typical

Intermodulation rejection
80dB typical

Hum and noise ratio
More than 40dB

Audio output power at 10% distortion
10W min. with a 4Ω load (External speaker)

Schrijf uw eigen review
  1 ster 2 sterren 3 sterren 4 sterren 5 sterren